Specifications: 

Features: 

– Ripstop, resistant to mid rain, coated PVC canopy.

– Use D rings to attach the awning to boat body.

– Folding aluminum tubing for easy storage.

– Mesh cloth provided to be attached to the top of canopy for item storage.

– Installs in minutes with no need of extra tools.

– Grounded with tent nails provided on the shore for stability.

Package Included:

1 * Boat Awning

1 * Set of Hardware 

1 * Mesh Cloth 

1 * Carrying Bag 

Instructions

1. Open the package, take out the parts and put them in categories;

2. Spread out the outer tent cloth, take out the tent pole, and put it into the tent cloth according to the following figure after connecting;

When fixing the two tent poles, please pay attention to lift up the tent poles and put them into the two fixing points in the tent;

The two long poles should ensure that both ends pass through the tent cloth evenly. The center point of the tent cloth should also be the center point of the two long poles. After wearing, tie it with the rope on the tent cloth

3. Take out the four D-shaped buckles in the nail bag and fix them in the four threading holes or oars in the front and back of the boat according to the following figure;

4. Put up the tent; insert one end of the long rod into the ring needle of the D-shaped buckle in the following way

5. Hook the elastic belt on the four corners of tent cloth on the D-shaped buckle;

6. Install the Internet;

7. Adjust the orientation of the ceiling and set it up (the wind rope can be used selectively)

Note:

This is boat tent, not included boat 

The post 2/3/4 Person Inflatable Boat Dinghy Awning Fishing Shade Cover Sun Canopy Folding Sunshade Tent Rain Shelter Boat Accessories appeared first on Hunting and Hiking.