Description
Specification:
Color |
Silver grey |
Material |
Aluminum |
Lampshade Material |
PC |
Number of beads |
28(14pcs white, 14pcs warm white) |
Lamp bead model |
2835 |
Luminous |
180LM |
Color temperature |
6500K/3000K |
Battery capacity |
400ma |
Power |
1.5W |
Working current |
380ma |
Light-up time |
400 minutes |
Input voltage |
5V1A |
Switches |
Tactile Switch/Human Induction |
Gross product weight |
85g |
Product size |
206*18*17mm |
Charging Interface |
USB |
Turn-off delay |
15s |
Features:
Larger Batter Capacity: Built-in 400mAh rechargeable battery.
More Brightness: With 28 LEDs, more bright than other 10 LEDs counter lights.
Longer LED Life: LED Life expectancy of more than 100000 hours.
Three Modes Adjustable: Multi Mode Choose Switch.
USB Rechargeable: Using rechargeable design, easily charged via usb cable. No longer use AAA battery.
Stick on Anywhere: Using magnetic back design, can stick on any iron product.
Package included:
1 x XANES® Wireless Wall Lamp
1 x USB Cable
Precautions:
1. This light has a built-in photosensitive element, so it may not work in daytime environment; users can adjust the working mode according to their needs.
2. The working environment temperature must be between -5°C and 40°C. If this temperature range is exceeded, false triggering may occur, or battery power consumption may increase.
3. This lamp is not waterproof, please do not place it in rain, severe humidity, and obvious light changes.
4. Do not place the induction lamp in a window, where the temperature or light changes significantly, otherwise it may cause malfunction
Instructions
1. Press the switch control;
2. Battery powered, USB charging
3. If the LED light is weak or not bright, it means that the product is in low power mode, and it can be used normally after charging
4. The light is turned on in a gradually bright working mode, touch the switch to turn on the constant light mode (white light and warm white light are on at the same time), trigger the switch again, the white light flashes once, turn on the white light human body induction mode, and then trigger the switch again, and the warm white light flashes Once, turn on the warm white light human body induction mode, and finally trigger the switch, the light flashes twice, the light goes out, and it stops working.
5. The red light is on when charging , and the blue light is on when the charging is completed.
6. Built-in magnet, easy to adsorb iron surface, easy to install, equipped with 3M glue magnet attracting iron sheet.